This study investigates whether adding ground compliance to visual feedback (VF) gait training is more effective at increasing push-off force (POF) compared to using VF alone, with implications for gait rehabilitation. Ten healthy participants walked on a custom split-belt treadmill. All participants received real-time visual feedback of their ground reaction forces. One group also experienced changes in ground compliance, while a control group received only visual feedback. Intentional increases in propulsive ground reaction forces (POF) were successfully achieved and sustained post-intervention, especially in the group that experienced ground compliance. This group also demonstrated lasting after-effects in muscle activity and joint kinematics, indicating a more robust learning of natural strategies to increase propulsion. This work demonstrates how visual and proprioceptive systems coordinate during gait adaptation. It uniquely shows that combining ground compliance with visual feedback enhances the learning of propulsive forces, supporting the potential use of compliant terrain in long-term rehabilitation targeting propulsion deficits, such as those following a stroke.

Due to hemiparesis, stroke survivors frequently develop a dysfunctional gait that is often characterized by an overall decrease in walking speed and a unilateral decrease in step length. With millions currently affected by this dysfunctional gait, robust and effective rehabilitation protocols are needed. Although robotic devices have been used in numerous rehabilitation protocols for gait, the lack of significant aftereffects that translate to effective therapy makes their application still questionable. This paper proposes a novel type of robot-assisted intervention that results in significant aftereffects that last much longer than any other previous study. With the utilization of a novel robotic device, the Variable Stiffness Treadmill (VST), the stiffness of the walking surface underneath one leg is decreased for a number of steps. This unilateral stiffness perturbation results in a significant aftereffect that is both useful for stroke rehabilitation and often lasts for over 200 gait cycles after the intervention has concluded. More specifically, the aftereffect created is an increase in both left and right step lengths, with the unperturbed step length increasing significantly more than the perturbed. These effects may be helpful in correcting two of the most common issues in post-stroke gait: overall decrease in walking speed and a unilateral shortened step length. The results of this work show that a robot-assisted therapy protocol involving repeated unilateral stiffness perturbations can lead to a more permanent and effective solution to post-stroke gait.

The integration of Supernumerary Limbs (SLs) on humanoid robots poses a significant stability challenge due to the dynamic perturbations they introduce. This thesis addresses this issue by designing a novel hierarchical control architecture to improve humanoid locomotion stability with SLs. The core of this framework is a decoupled strategy that combines learning-based locomotion with model-based balancing. The low-level component consists of a walking gait for a Unitree H1 humanoid through imitation learning and curriculum learning. The high-level component actively utilizes the SLs for dynamic balancing. The effectiveness of the system is evaluated in a physics-based simulation under three conditions: baseline gait for an unladen humanoid (baseline walking), walking with a static SL payload (static payload), and walking with the active dynamic balancing controller (dynamic balancing). Our evaluation shows that the dynamic balancing controller improves stability. Compared to the static payload condition, the balancing strategy yields a gait pattern closer to the baseline and decreases the Dynamic Time Warping (DTW) distance of the CoM trajectory by 47\%. The balancing controller also improves the re-stabilization within gait cycles and achieves a more coordinated anti-phase pattern of Ground Reaction Forces (GRF). The results demonstrate that a decoupled, hierarchical design can effectively mitigate the internal dynamic disturbances arising from the mass and movement of the SLs, enabling stable locomotion for humanoids equipped with functional limbs. Code and videos are available here: https://github.com/heyzbw/HuSLs.

Additionally, our approach accelerates learning of walking tasks and increases learning success rate.

Electromyography (EMG) signals are widely used for predicting body joint angles through machine learning (ML) and deep learni ng (DL) methods. However, these approaches often face challenges such as limited real - time applicability, non - representative test c onditions, and the need for large datasets to achieve optimal performance. This paper presents a transfer - learning framework for knee joint angle prediction that requires only a few gait cycles from new subjects. Three datasets - Georgia Tech, the Universi ty of California Irvine (UCI), and the Sharif Mechatronic Lab Exoskeleton (SMLE) - containing four EMG channels relevant to knee motion were utilized. A lightweight attention - based CNN - LSTM model was developed and pre - trained on the Georgia Tech dataset, t hen transferred to the UCI and SMLE datasets. The proposed model achieved Normalized Mean Absolute Errors (NMAE) of 6.8 percent and 13.7 percent for one - step and 50 - step predictions on abnormal subjects using EMG inputs alone. Incorporating historical knee angles reduced the NMAE to 3.1 percent and 3.5 percent for normal subjects, and to 2.8 percent and 7.5 percent for abnormal subjects. When f urther adapted to the SMLE exoskeleton with EMG, kinematic, and interaction force inputs, the model achieved 1.09 p ercent and 3.1 percent NMAE for one - and 50 - step predictions, respectively. These results demonstrate robust performance and strong generalization for both short - and long - term rehabilitation scenarios . Keywords: EMG, Transfer Learning, Knee Angle Prediction, Attention Mechanism, Rehabilitation, Exoskeleton . 1 - Introduction Electromyography (EMG) measures electrical signals generated by contracting muscle fibers, reflecting neuromuscular activity. EMG is typically measured using electrodes placed on the skin's surface (surface Electromyography (sEMG)). Alternatively, electrodes may be inserted into the muscle tissue [2] . The frequency range of EMG signals is generally reported to be from 6 to 500 Hz, with most power concentrated between 20 and 250 Hz [3] . Analyzing EMG signals provides valuable information about muscle activation patterns, coordination, and fatigue levels.

Elongate limbless robots have the potential to locomote through tightly packed spaces for applications such as search-and-rescue and industrial inspections. The capability to effectively and robustly maneuver elongate limbless robots is crucial to realize such potential. However, there has been limited research on turning strategies for such systems. To achieve effective and robust turning performance in cluttered spaces, we take inspiration from a microscopic nematode, C. elegans, which exhibits remarkable maneuverability in rheologically complex environments partially because of its ability to perform omega turns. Despite recent efforts to analyze omega turn kinematics, it remains unknown if there exists a wave equation sufficient to prescribe an omega turn, let alone its reconstruction on robot platforms. Here, using a comparative theory-biology approach, we prescribe the omega turn as a superposition of two traveling waves. With wave equations as a guideline, we design a controller for limbless robots enabling robust and effective turning behaviors in lab and cluttered field environments. Finally, we show that such omega turn controllers can also generalize to elongate multi-legged robots, demonstrating an alternative effective body-driven turning strategy for elongate robots, with and without limbs.

Abstract-- Foot drop is commonly managed using Functional Electrical Stimulation (FES), typically delivered via open-loop controllers with fixed stimulation intensities. While users may manually adjust the intensity through external controls, this approach risks overstimulation, leading to muscle fatigue and discomfort, or understimulation, which compromises dorsiflexion and increases fall risk. In this study, we propose a novel closed-loop FES controller that dynamically adjusts the stimulation intensity based on real-time toe clearance, providing "assistance as needed". We evaluate this system by inducing foot drop in healthy participants and comparing the effects of the closed-loop controller with a traditional open-loop controller across various walking conditions, including different speeds and surface inclinations. Kinematic data reveal that our closed-loop controller maintains adequate toe clearance without significantly affecting the joint angles of the hips, the knees, and the ankles, and while using significantly lower stimulation intensities compared to the open-loop controller . These findings suggest that the proposed method not only matches the effectiveness of existing systems but also offers the potential for reduced muscle fatigue and improved long-term user comfort and adherence.

This paper extends the forced-oscillation-based reduced-order model of walking to a model with ankles and feet. A human-inspired paradigm was designed for the ankle dynamics, which results in improved gait characteristics compared to the point-foot model. In addition, it was shown that while the proposed model can stabilize against large errors in initial conditions through combination of foot placement and ankle strategies, the model is able to stabilize against small perturbations without relying on the foot placement control and solely through the designed proprioceptive ankle scheme. This novel property, which is also observed in humans, can help in better understanding of anthropomorphic walking and its stabilization mechanisms.

-- The human foot serves as the critical interface between the body and environment during locomotion. Existing musculoskeletal models typically oversimplify foot-ground contact mechanics, limiting their ability to accurately simulate human gait dynamics. We developed a novel contact-rich and deformable model of the human foot integrated within a complete musculoskeletal system that captures the complex biomechanical interactions during walking. T o overcome the control challenges inherent in modeling multi-point contacts and deformable material, we developed a two-stage policy training strategy to learn natural walking patterns for this interface-enhanced model. Comparative analysis between our approach and conventional rigid musculoskeletal models demonstrated improvements in kinematic, kinetic, and gait stability metrics. V alidation against human subject data confirmed that our simulation closely reproduced real-world biomechanical measurements. This work advances contact-rich interface modeling for human musculoskeletal systems and establishes a robust framework that can be extended to humanoid robotics applications requiring precise foot-ground interaction control.